Specifications
of LCP 4000.11 |
| Control |
analog |
| Maximum operating pressure |
35 MPa |
| Pump system |
Two sapphire pistons (OD 4mm) link parallel, work in opposite cycle |
| Precision of pressure measurement |
± 2% |
| Flow rate setting |
0,1 - 9,9 ml/min or |
| 0,01 - 0,99 ml/min with switching |
| Method of setting |
0,1 ml/min increments or |
| 0,01 ml/min in the range of 0,01- 0,99 ml/min |
| Precision of set flow rate (1 ml/min, 12 MPa H2O) |
± 2% |
| Adjustable lower pressure limit |
0 - 35 MPa (stepless) |
| Adjustable upper pressure limit |
5 - 40 MPa (stepless) |
| Material of pumping head |
stainless steel |
| Power requirements |
230 V ± 10%, 50 Hz |
| Power input |
30 VA |
| Dimensions (W x H x D) |
309 x 200 x 400 mm |
| Weight |
12 kg |
Specifications
of LCP 4000.4 |
| Control |
analog |
| Maximum operating pressure |
20 MPa |
| Pump system |
Two sapphire pistons (4mm) link parallel, work in opposite cycle |
| Precision of pressure measurement |
± 2% |
| Flow rate setting |
0,1 - 9,9 ml/min or |
| 0,01 - 0,99 ml/min with switching |
| Method of setting |
0,1 ml/min increments or |
| 0,01 ml/min in the range of 0,01- 0,99 ml/min |
| Precision of set flow rate (1 ml/min, 12 MPa H2O) |
± 2% |
| Adjustable lower pressure limit |
0 - 15 MPa (stepless) |
| Adjustable upper pressure limit |
5 - 20 MPa (stepless) |
| Material of pumping head |
PEEK(-ové) |
| Power requirements |
220 V ± 10%, 50 Hz |
| Power input |
30 VA |
| Dimensions (W x H x D) |
309 x 200 x 400 mm |
| Weight |
12 kg |
