LCP 4100 - Specification
LCP 4100 - Specification |
|
|
| Control | digital |
| Maximum operating pressure | 35 MPa |
| Pump system | Two sapphire pistons (4mm) link parallel, pistons work in opposite cycle |
| Precision of pressure measurement | ± 2% |
| Flow rate setting | 0,01 - 9,99 ml/min |
| Method of setting | by step 0,01 ml/min |
| Precision of set flow rate (1 ml/min, 12 MPa H2O) | ± 2% |
| Adjustable lower pressure limit | 0 - 39,9 MPa (by step 0,1MPa) |
| Adjustable upper pressure limit | 0 - 40 MPa (by step 0,1MPa) |
| Material of pumping head | stainless steel - option PEEK |
| Data entry | 16 element keyboard |
| Display | 2 lines 40 characters |
| Power requirements | 230 V ± 10%, 50 Hz |
| Power input | 50 VA |
| Dimensions (W x H x D) | 260 x 160 x 460 mm |
| Weight | 12 kg |
|
|
|
| Control | digital |
| Maximum operating pressure | LCP 4100.2 35 MPa LCP 4100.3 20 MPa |
| Pump system | Two sapphire pistons (4mm) link parallel, pistons work in opposite cycle |
| Precision of pressure measurement | ± 2% |
| Flow rate setting | 0,01 - 9,99 ml/min |
| Method of setting | by step 0,01 ml/min |
| Precision of set flow rate (1 ml/min, 12 MPa H2O) | ± 2% |
| Adjustable lower pressure limit | 0 - 39,9 MPa (by step 0,1MPa) |
| Adjustable upper pressure limit | 0 - 40 MPa (by step 0,1MPa) |
| Material of pumping head | stainless steel - LCP 4100.2 |
| PEEK - LCP 4100.3 | |
| Mixing of gradient mobile faze | to input of pump |
| Maximum flow in a gradient mode | 3 ml/min |
| Number of valves | 3 (A, B, C) |
| Maximum number of gradient steps | 50 |
| Concentration range B, C | 0 - 100% in 1% steps, component A is automaticly fill in 100% |
| Duration of a single gradient step | 1s - 999 min 59s |
| Maximum number of stored files (programmes) | 100 |
| Data entry | 16 element keyboard |
| Display | 2 lines 40 characters |
| Power requirements | 230 V ± 10%, 50 Hz |
| Power input | 50 VA |
| Dimensions (W x H x D) | 260 x 160 x 460 mm |
| Weight | 12 kg |