BOD System 6

BOD System 10

BOD Sensor System 6
BOD Sensor System 10

BOD Sensor System 6 and 10 equipment have been developed by Velp according to international safety rules for worker and environment protection. An innovative, microprocessor controlled, electronic pressure measuring system (without mercury) allows BOD determinations (Biological Oxygen Demand) by manometric technique.

BOD Sensor System 6 and 10 are composed by a 6 or 10 places stirring groups with 6 or 10 BOD Sensor units, 6 or 10 alkaly holders for carbon dioxide absorption, 6 or 10 dark glass bottles, 6 or 10 stirring bars, offering to users a complete equipment, immediately operative for measuring BOD values within four scales: 90, 250, 600, 999 ppm, higher values after dilution.

Inox steel structure epoxy painted gives to the equipment a strong resistance to chemical corrosion. The compact design allows the contemporary operation of 6 or 10 BOD bottles in a reduced space.

Two side embedded handles allow an easy introduction or removal of the equipment from a refrigerated thermostat also with bottles in place. The used motor for stirring assures a continuous operation without risks of stops or overheating which could impair the results of the BOD determination.

An operation manual with method is supplied with the equipment

• FOC225E For contemporary incubation of two System 6 or 10 groups.
  Programmable temperature from 0 to 50°C
• FTC90E For incubating one System 6 or 10 group.
  Programmable temperature from 0° to 50°C
• FTC90 For incubating one System 6 or 10 group
  Fixed temperature of 20°C